Application solution
Industrial Flooring
Intermediate and topcoat polyaspartic systems for warehouses, workshops and commercial floors.
Floor systems use elastic intermediate coats (high elongation, tensile strength, wear resistance) and UV-stable topcoats with high hardness and toughness. Suitable for industrial and commercial concrete floors.
Note: Topcoat hardness (Shore A) in the source catalog OCR reads "≤1 mm", which does not match Shore A units — treat as pending verification against original TDS.
⚠️ Floor topcoat Hardness (A) OCR value ≤1 mm is inconsistent with Shore A; verify original catalog.
Recommended grades
DSPA-520
Mid-viscosity polyaspartic resin for manual / hand-applied polyurea and flooring; longer gel window. Evaluation grade for formulators comparing slower mid-range polyaspartic resins in the same performance class.
MonolithDSPA-1720
Low-viscosity reactive-diluent class polyaspartic amine resin for high-solids 2K coatings — flooring, anti-corrosion topcoats and industrial finishes. Evaluation grade for formulators comparing low-viscosity / reactive-diluent polyaspartic resins in the same performance class. Confirm viscosity, EW and gel with factory TDS.
MonolithDSPA-524
Medium viscosity, moderate speed, handmade polyurea
MonolithDSPA-5208
Medium viscosity, slow curing, handmade polyurea
MonolithDSPA-4560
Medium viscosity, slow curing, handmade polyurea
Dongsen ChemicalsHDX-100
Non-yellowing aliphatic HDI trimer; fast drying; high hardness and high solid build / high crosslink density. 100% solids.
Dongsen ChemicalsHDX-1200
Featured Dongsen Chemical hardener for polyaspartic and PU systems on this site. Specifications, TDS and samples — see Dongsen Chemicals or request via Monolith contact.